ICP DAS USA PMC-523 Series, Руководство пользователя

Страница: 201 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
186
ii
After clicking the “Add new schedule”, a setting page will appear,
input name in the “Name” field and you could also input the
description of this schedule in the “Description” field.
iii
Select Mode to be “Calendar” or “Repeat”.

Calendar
：
(a.)
In the “Date” field, select the “Starting Month” and “Duration”
from the dropdown list. The maximum duration can be set is
120 months. After you specify the Year and Month in the Date
section, the calendars corresponding to the Year and Month you
specified will appear as shown below:
Figure10-50 : Calendar mode of Schedule setting
(b.)
In the “Time Range(s)” section, click “Add” to add new Time
Range to execute this schedule. Select the start time and the end
time from the dropdown list. Each Schedule is required to set at
least one Time Range; click on “Add” to add more Time Range.
Please note: the time zones you specified can’t be overlapped. If
you specify an end time that is earlier than the start time, such
as 20:00:00 ~ 06:00:00, it indicates the end time will be set one
day after the start date. Click “Remove” to remove a pre-set