ICP DAS USA PMC-523 Series, Руководство пользователя

Страница: 96 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
81
following section.

Move Up: Click the radio button in front of the power meter
and click on “Move Up” to move the power meter to upper
order (upper index number (No)).

Move Down: Click the radio button in front of the power meter
and click on “Move Down” to move the power meter to lower
order (lower index number (No)).

Copy: To copy the settings of a pre-set power meter to the new
power meter, please click the radio button in front of the pre-set
power meter and then click on “Copy”, a new power meter (in
sequence) will be added to the list and the settings of the old
power meter will be copied to this newly added power meter.

Remove: Click the radio button in front of the power meter and
click on “Remove” to remove the selected power meter.
After all settings are completed, click “Save” button to save the
changes.
7.1.5 Modbus RTU Power Meter Setting
PMC/PMD support ICP DAS Single-phase and Three-phase Modbus
RTU Power Meters, the following section will give more detailed
settings of each power meter setting page.

The Three-Phase Modbus RTU Power Meter Setting page is shown
as follow (using PM-3133 as an example):