1.2 I/O Signal connector
Assuring reliable connections is one of the most important tasks when sending or
receiving data from your application systems. This chapter will introduce I/O
connector (for general purposes) on DN-8368MB and machine platform specific I/O
connector. Users can find various signal usage and meanings in this section.
CON1
The I/O connector on DN-8368MB is a 68-pin SCSI II connector that enables you to
connect to the sensors and motor drivers to the motion card. Please note: there
are two groups of connectors (CN1A/ CN1B) on the main card; therefore, the same
signal may have a different name on each sub board. Please refer to Table 1-1,
Table 1-2for your reference.
http://www.icpdas.com
DN-8368MB User Manual
V 1.0
5
