CON2
The connectors CON2 are a 5-pin connector for external Power supply (24V input).
Table 1-3 shows its I/O connector signal description.
Table 1-3
Pin NO
Pin Define
Function description
1
FGND
Frame ground of DN-8368MB
2
EGND
Ground of the external power
3
EGND
Ground of the external power
4
E24V
External power supply of +24V DC
5
E24V
External power supply of +24V DC
CON3
The connector CON3 is a 3-pin connector for connecting general purpose I/O.
There are one digital input and one digital output signal, when the connectors
connect to the CN1A of main card (the one closer to the PCB board), the input
signal is defined as emergency stop. When the connectors connect to the CN1B of
main card, the input signal is defined as general purpose input signal. Table 1-4
shows its I/O connector signal description:
Table 1-4
Pin NO
Pin Define
Function description
1 N.C
No
Connection
2
EMG/GDI11
Emergency stop signal( or General purpose input signal)
3
GDO1/GDO2
General purpose output signal
http://www.icpdas.com
DN-8368MB User Manual
V 1.0
8
