66
2-7-1-2 Setup procedure for ‘Station-Infrastructure’:
In this mode, you can connect the router to Ethernet device such us TV, Game
player, HDD&DVD to enable the Ethernet device be a wireless station and join
to a wireless network through an access point or AP router.
Here are descriptions of every setup items:
Band (2):
Select the band you want to use.
SSID (3):
This is the name of wireless network. You can type the
SSID of the network you would like to connect here.
Site Survey (4):
When you use this wireless router as a wireless
station for Ethernet network device to have wireless
capability, you have to associate it with a working
access point. Click ‘Select Site Survey’ button, then a
“Wireless Site Survey Table” will pop up. It will list all
available access points near by. You can select one
access point in the table and it will join wireless LAN
through this access point.
Wireless MAC
For some applications, you may need to designate a
Address (5): specific MAC address for the router. Please enter the
TIPS: You can try to change channel number to another one if you think the
data transfer rate is too slow. There could be some other wireless routers using
the same channel, which will disturb the radio communication between
wireless client and the wireless router.
1
2
3
4
5
Содержание NI-707539
