Icidu NI-707539, Руководство пользователя

Страница: 100 / 141

91
Remote IP Specify the remote (destination) IP address
Address: (e): that will be affected by this rule. Please input the
starting IP address in the left field, and input the end
IP address in the right field to define a range of IP
addresses, or just input the IP address in the left field
to define a single IP address.
Remote Port
Please input the range of remote (destination)
Range (f): port number that will be affected by this rule. If you
want to apply this rule on port 80 to 90, please
input ’80-90’; if you want to apply this rule on a single
port, just input the port number, like ‘80’.
If the remote
(destination) IP address and /or port number is
universal, just leave it blank.
Traffic Type (g):
Please select the traffic type of this rule,
available options are None, SMTP, HTTP, POP3, and FTP.
You can select a specific traffic type for this rule, if you
want to make this rule as a IP address based rule
(apply the limitation on all traffics from / to the
specified IP address / port number), select ‘None’.
Protocol (h):
Please select the protocol type of this rule,
available options are TCP and UDP. If you don’t know
what protocol your application uses, please try ‘TCP’
first, and switch to ‘UDP’ if this rule doesn’t seems to
work.
After you finish with all settings, please click ‘save’ button (i), you’ll be
brought back to previous menu, and the rule you just set will appear in
current QoS table; if you did anything wrong, you’ll get an error message
when you click ‘Save’ button, please correct your input by the instructions
given by the error message.
If you want to erase all values you just entered. Click ‘Reset’