38
Here are descriptions of every setup items:
Host Address (1):
Input the IP address of the remote host you wish to
initiate a management access.
Port (2):
You can define the port number this router should
expect an incoming request. If you’re providing a web
service (default port number is 80), you should try to
use other port number. You can use the default port
setting ‘8080’, or something like ‘32245’ or ‘1429’.
(Any integer between 1 and 65534)
Enabled (3):
Select the field to start the configuration.
When you finish with all settings, click ‘Apply’, and you’ll see the following
message displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so
the settings will take effect after it reboots.
Содержание NI-707539
