67
MAC address here. If you are connecting the router to
a computer, you can simply press ‘Clone Mac address’
button to fill the MAC address field with the MAC
address of your computer.
2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:
In this mode, you can connect your wireless router with another, to combine
two access points and expand the scope of wireless network, and all clients
(wired only – AP will not accept wireless clients in this mode) of two wireless
routers will think they’re on the same physical network. This function is very
convenient when you need to connect two networks between two buildings.
Here are instructions about how to connect two wireless routers together:
Here are descriptions of every setup items:
Band (2):
Select the band you want to use, two wireless routers
must use the same setting.
Channel
Select the channel you want to use, two wireless
Number (3):
routers must use the same setting.
MAC
address 1(4):
Input the MAC address of another wireless router.
NOTE: Two wireless routers must use the same mode, band, channel number,
and security setting!
1
2
3
4
5
Содержание NI-707539
