iCanView230/230W User’s Guide
y
MIC /LINE IN :
Connect external audio source or microphone. If external audio is connected,
embedded microphone will be disabled.
Use Standard stereo earphone jack for the connection
Audio In
Ground
Not used
Audio In
Ground
Not used
Audio out
Ground
Not used
Audio out
Ground
Not used
Figure 2-3. Pin assignment of the plug for MIC/LINE In (left) and
LINE OUT (right)
y
LINE OUT : Connect speakers with built in amplifier. Audio from remote site is output through
Line out in bi-directional audio mode.
Use Standard stereo earphone jack for the connection.
y
100BaseT
: 100Mbps Ethernet connector (RJ-45) with proprietary PoE.
- LINK LED : Continuous yellow light means that network cable is plugged in. It will flicker
when there is traffic.
- Status LED: Green color indicates that the camera is in normal operation mode, while RED
color indicates that the camera is in abnormal condition.
y
RS-232C & Video-out
3 Pins from the bottom of the connector are assigned for RS-
232 port, while the remaining 2
pins are used for checking composite video output from the camera. Please note that the
bottom most pin is numbered as 1.
Pin
Description
Misc.
1
TxD of RS-232C
For debugging & factory use only.
2
RxD of RS-232C
For debugging & factory use only.
3
Ground of RS-232C
For debugging & factory use only.
4
Video out from the camera
For use in installation.
5
Ground for Video out.
For use in installation
Rev.1.0 (Aug. 2006)
9 of 54
