iCanView230/230W User’s Guide
Sensor
Select
Check to enable Sensor initiated capture.
Motion
Detection
Select
Check to enable motion detection initiated capture.
Select a way of sending captured video. You can send captured
video through FTP or E-mail, or both.
-
By E-Mail
Check to send captured video by e-mail.
E-mail is sent to the Recv E-mail address. Refer to
[Section
5.3.]
Captured video data for E-mail consists of intra frames only in
consideration of the limited storage space for E-mail account.
FTP data contains entire video frames.
Captured
Video
Transmission
By FTP
Check to send captured video by FTP.
FTP is sent to the FTP Server. Refer to
[Section 5.3.]
If the FTP server is not properly assigned in “Network
Configuration” mode, iCanView230/230W ignores the video
transmission by FTP
SAVE
Save the setup parameters.
Rev.1.0 (Aug. 2006)
35 of 54
