iCanView230/230W User’s Guide
Field/Button
Sub Field
/Button
Description
The network types supported by the iCanView230/230W are
LAN(fixed IP), PPPoE, and DHCP(automatic IP allocation)
Static IP Set
up
When the network environment is fixed IP, select ‘LAN’ in the
network type, and put the IP address, Subnet Mask, Gateway,
DNS1 and DNS2. Ask your network administrator or ISP for the
information. DNS2 is used when DNS1 does not work.
PPPoE Setup
When the network environment is PPPoE and IP address is
assigned automatically, select ‘PPPoE’ in the network type.
Next, fill in the ‘User Name’ and ‘Password’ fields with the
values assigned by the ISP.
DHCP Setup
When the network environment is “automatic IP allocation by
DHCP”, select ‘DHCP’ in the network type. For cable modem
connection, select this mode.
Refer to
[IP-installer user’s guide]
for “Host name and
domain for Cable Modem
IP Assign Type
Clone MAC
Refer to
[IP-installer user’s guide]
for “Clone MAC”
Each port should have a number below 65535.
RTSP
The RTSP port is used for transmitting real time audio/video
data from the network camera. Default is 554.
Port Change
HTTP
HTTP port is used for the connection to the admin page.
Default is 80.
You can restrict the access to the administrator page from IP
addresses beyond certain IP address range.
Restrict
Administrator
Access
Check at this box to restrict administrative log on.
Base IP
Address
Input IP address of the PC which is intended to be used for log
on to administrative mode.
IP Filtering
Mask
This is same as subnet mask. It is used to allow administrative
log on only to the PCs located in the same subnet as the base
IP address. If you want to allow only one PC to access in
administrative mode, set this value to 255.255.255.255.
E-Mail Setup
Rev.1.0 (Aug. 2006)
25 of 54
