iCanView230/230W User’s Guide
2.4. PC Requirements
AV streaming data received from iCanView230/230W can be decoded or stored in a PC running i-
NVR program which is a viewing & recording program for a PC. Minimum requirement of the PC is
described below:
Minimum
Recommended
CPU
Pentium III 700
Pentium IV 1.2G above
Main Memory
128 MB
256MB above
Operating system
*
Windows 2,000 or later
Windows 2,000 or later
Web browser
Internet Explorer 5.0
Internet Explorer 5.0 above
Resolution
1,024 X 768
Higher than 1,024 X 768
Network
10 Base-T Ethernet
100 Base-T Ethernet
* Operating Systems supported : Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information you
are recommended to refer to pertinent documentations provided with the product or refer to
iCanTek’s home page (http://www.icantek.com)
1.
Connect iCanView230/230W to LAN by using one of the following method
1) If you have power adaptor and PoE injector, connect the network camera and PC as
illustrated in Figure 2.4. Both power and network connection is made with a single LAN
cable.
2) If you have power adaptor with PoE, connect the network camera and PC as illustrated in
Figure 2.5. Both power and network connection is made with a single LAN cable.
z
The propriety PoE (Power over Ethernet) adds convenience in installing the network
camera by providing both power and LAN connection using single LAN cabling.
3) If you have standard power connect the network camera and PC as illustrated in Figure
2.6.
Rev.1.0 (Aug. 2006)
11 of 54
