iCanView230/230W User’s Guide
PTZ Device ID
Your PT device needs an ID, input ID in this field.
Click on SAVE to save the ID.
Note that zoom is not applicable for iCanView230/230W.
PTZ Operation
Check
You can check the various operation of the PT devices.
“Left”/”Right”/”UP”/”DOWN”
You can set up the PTZ limitation & preset positions if the PT
device supports it.
Panning
Limitation
Set the left/right limitation and test.
Select Left/Right position before setting.
Panning
Limitation
RESET
Clear the panning limitation previously set.
The panning range will be the same as the PT device allows.
Panning
Limitation
SET
Set the present position as left or right panning limitation.
Panning
Limitation
TEST
Test the panning limitation which was set previously.
Preset
Position :
Set the preset position and test.
Preset
Position
Preset &
Move
Select a preset position to move to. Movement to the preset
position will be made upon clicking on “MOVE”
Preset
Position
Name Set
Assign logical name for the preset position. Enter into the field
and click on SET.
PTZ Position
Setup
Preset
Position
Set
Set the present position as a preset position with position number
shown at the right of “Preset & Move” and name shown at the
right of “Name Set”.
<Note> : “PTZ Position Setup” feature is applicable only for the PT devices that support it.
Rev.1.0 (Aug. 2006)
41 of 54
