iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
24 of 56
- Video Size : Select a video size for transmission. Allowed video size is different for each video
standard.
- NTSC(30 frames/sec Max.) : 176x144 / 320x240 / 640x240 / 640x480.
- PAL/SECAM (25 frames/sec Max.) : 176x144 / 352x288 / 704x288 / 704x576
z
Max upload rate
Assign maximum bandwidth of the uplink for the network connected to iCanView110.
z
Frame rate
Assign number of video frames transmitted for each second. You can improve picture
quality by lowering frame rate for the same bandwidth.
z
Video rate
Assign bandwidth for transmitting video data.
z
Audio rate
Assign bandwidth for transmitting audio data. Audio data is not transmitted if you
select “
NA
”
y
Check
After you finish set up of video and audio for all the channels, check this box to obtain the
possible maximum number of users
(Possible Max Users) and
remaining network bandwidth
(Remained) remaining when possible maximum users are connected.
y
Possible Max Users
It shows the number of maximum simultaneous connections for the network connection set-up.
y
Remained
It shows the network bandwidth remaining when
Possible Max Users
are connected.
.
y
Limited users
Useful network bandwidth varies according to the condition of the network. This parameter is
used to limit the number of the simultaneous connections below the number shown in
Possible
Max Users
.
y
Save
Save the set-up parameters when the set-up parameters are done.
