iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
28 of 56
5.4. Wireless Configuration
For the case of a network camera having built in wireless LAN it is needed to set up wireless LAN
configuration parameters. Click “
Wireless Configuration
”.
Figure 5-5 Wireless Configuration
y
Wireless LAN Setup
Set up parameters for wireless LAN.
-
Use Wireless LAN
: Select “Enable” to use wireless interface. If “Disable” is selected,
Ethernet interface is used instead of wireless LAN interface.
-
SSID
: Enter the ID of the wireless LAN access point to be connected, when wireless LAN
interface is selected.
-
Use WEP
: Select the mode of WEP. If WEP is not used select “Disable”
-
Key Value
: Set the value of WEP Key.
-
Wireless Power
: Set the maximum transmission power level of Wireless LAN.
y
WLAN Information
Information regarding wireless LAN interface is displayed.
-
MAC Address
: Indicates MAC address of the Wireless LAN card.
