iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
34 of 56
-
Add User
.
Username
: Enter the user ID you want to add. Up to 100 users are supported by
iCanView110.
.
Password
: Enter the user password.
.
Attribute
: You can set different system resource access capabilities for each of the user.
Attributes are Audio, Bi-directional Audio and Pan/Tilt.
For example, if you want a specified user to hear the audio from the
iCanView110, check Audio in the check box.
-
User List
:
You can list “user ids” and “ their attributes” here.
format : user id[A, BA, P] : A – audio, B – bi-directional audio, P – ptz, attribute.
you can delete specific user by clicking the “DELETE” button.
y
Authentication for Viewing
: If you want to restrict viewing access to the iCanView110,
check “Yes” box and click on “Save”. Users need to input ID and
password to connect to iCanView110 in viewing mode. (Figure 5-
8.)
-
If No, default attribute :
If you uncheck the above “
Yes
”, every user can access the
iCanView110 without restriction with the same attribute set in
here. You can enable by checking each attribute and clicking
“
Save
” button.
y
Time Setup
-
Current Time
:
It shows you the current time of iCanView110.
Figure 5-8. User Authentication in iCanView110
Even if you have added a user through authentication for viewing connection
to the iCanView110 will not be enabled unless you check “Yes” in
“Authentication for Viewing” and click on the “Save” button.
