iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
52 of 56
2. After Successfully Connecting to the iCanView110
•
Video movement is slow.
In Basic Setup of Admin Mode, lower the “Quality”. High quality means more data. You can also
set the “Max. Bandwidth” to higher value. But this value must be lower than the maximum
upload speed of your network. For example, if the maximum uploading bandwidth of the
network is 400Kbps, set the total “Max. Bandwidth” of the 4 channels to 384Kbps. If you set it
higher, the video image can be corrupted with artifacts.
Ask your network manager or ISP for maximum uploading bandwidth of the network.
•
The image is dull and I see green, pink dots.
This could be caused by performance limitation of the PC. Do not run too many programs while
running viewer program. The other reason could be missing data while transmission from
iCanView110.
•
Mosaic phenomenon.
Mosaic phenomenon occurs when not enough network bandwidth is available considering the
resolution and frame rate of the video.
Example is 640x240 video with low Max. Bandwidth.
Users are recommended to adjust resolution and frame rates to lower values for lower
bandwidth network.
