iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
40 of 56
.
You can set the region by pressing the “START” button, and click one corner of region in
the left viewing. It will show the coordinate value automatically. Next you press the “END”
button, and click the other diagonal corner.
Regions are shown in three different transparent colors:
red(region 1), green(region 2), blue(region3)
“RESET”
button clears the start & end point to (0,0) & (0,0)
. Percent : This value controls the sensitivity of each region.
1 is the most sensitive and 100 is the least sensitive.
