iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
46 of 56
Bootloader needed for the upgrade can be downloaded from iCanTek’s home page.
Refer to
[6.4
.
How To Upgrade Your iCanView110 System]
.
- Add PTZ File :
Add a new PTZ driver software via the network. PTZ driver can be
downloaded from iCanTek’s home page. Refer to
[6.4
.
How To Upgrade Your
iCanView110 System]
.
y
Factory Default Setting
: Re-initialize iCanView110 to factory default state.
By checking on a
Radio button “Except Network Configuration”, you can preserve the paramteres for the network.
Checking on “All”, will return all the parameters to factory default state.
y
System Reset
: Perform remote reset by clicking the “CONFIRM” button.
Once iCanView110 is re-initialized as factory default state, it should be set-up
again using IP-Installer.
All previous connections will be disconnected upon reset. iCanView110
does
not resume the connections and the users must re-connect to the server
manually.
