IC Bus Gasoline CE Series Скачать руководство пользователя страница 97

Страница: 97 / 241

Seating and Safety Restraints

39–inch Flex Seat

Sliding dual buckles (two seating position)

Use for two children:

Slide the sliding dual buckles on

right-side all the way left to create two seating positions.

Sliding dual buckles (three seating position)

Use for three children:

Slide the sliding dual buckles on

right-side all the way right to create three seating positions.

Integrated Child Restraint Seats (If Equipped)

WARNING

To prevent personal injury and / or death, or
property damage, observe the following:

•

Follow all instructions on the child restraint and
in this manual.

•

It is important to use an approved rearward
facing infant restraint for a full year to allow the
neck and spine to develop enough to support
the weight of the child’s head in the event of a
collision.

•

Adjust the belts provided with this child restraint
snugly around the child.

Содержание Gasoline CE Series


















































































































































































































































Результаты поиска

Содержание Gasoline CE Series

Отзывы:

Бренды по названию

Популярные бренды

IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Gasoline CE Series

Отзывы:

Бренды по названию

Популярные бренды