IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 140 / 241

Operation
Parking Brake Indicator Light
The parking brake indicator is illuminated when the parking
brake is applied. During engine cranking period the parking
brake indicator should illuminate. This indicator goes out after
the engine is started if the parking brake is not applied. If the
parking brake is applied, this indicator remains on after engine
has started. If the indicator does not illuminate during cranking
period, the light bulb may be defective.
Antilock Braking System (ABS)
WARNING
To prevent personal injury and / or death, or
property damage,
Antilock Brake System(s)
(ABS) are designed to enhance overall vehicle
safety when a vehicle is driven within its safe
operating limits.
ABS cannot compensate
for a vehicle that is being driven beyond the
physical limits of control.
Drivers operating
an ABS-equipped vehicle should employ safe
driving practices and assume no additional
driving risks.
WARNING
To prevent personal injury and / or death, or
property damage, do not rely on the Antilock
Brake
System (ABS) to interrupt vehicle
engine brake on slippery road surfaces. Turn
these devices OFF during hazardous driving
conditions. Failure to follow this warning may
cause wheel slippage and / or loss of vehicle
control.
WARNING
To prevent personal injury and / or death, or
property damage, if the Antilock Brake System
(ABS) warning indicator comes on, have the ABS
repaired immediately as stopping distances may
increase under certain braking conditions. Take
every precaution to prevent wheel lockup, which
could result in loss of vehicle control.
CAUTION
To prevent damage to the electrical system
or ABS components,
when welding on an
ABS-equipped vehicle disconnect the power
connector from the Electronic Control Unit (ECU).
The ABS system is a mandated system used with the Hydraulic
and Air Brake systems. The antilock brake system electronically
monitors vehicle wheel speed, and only engages when wheel
lock is imminent. The standard brake system controls normal
braking when the ABS is not engaged.
126