IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 88 / 241

Seating and Safety Restraints
Seat Height Adjustment
1. Seat height lever
2. Forward / Aft adjustment bar
3. Seat height adjustment lock knob
4. Lumbar support squeeze bulb
5. Release valve
6. Seatback adjustment lever
There are three possible seat heights available: top, middle, and
low. At the top position three adjustment holes are visible, and
at the low position none of the holes are visible.
NOTE: Seat height adjustments must be made BEFORE
OCCUPYING THE SEAT.
Adjust the seat height as follows:
1. Loosen the seat height adjustment lock knob just
enough to allow seat height adjustment.
2. While standing to the side of the seat, lift and hold the
seat height lever while raising or lowering the seat to the
desired height, then release the lever. While adjusting
the seat height, the seat height lever may remain in the
up position. The location and orientation of the height
adjustment lever may vary.
3. When at the desired position, move the seat slightly up
or down until the seat height lever snaps to its height
engaged (down) position.
4. After the desired seat position is satisfied, tighten the
seat height adjustment lock knob.
Forward / Aft Adjustment
Lift and hold the forward / aft adjustment bar to move the seat
forward or backward, and release the lever at the desired
position.
Seatback Adjustment
The seatback adjustment lever is located on the left-side of
the seat. Lift and hold the seatback lever while moving the
seatback forward, or rearward, and release the lever at the
desired position.
74