IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 126 / 241

Operation
1. Apply the parking brake. Place the transmission in the
Neutral or Park position. Turn OFF the headlights and
all accessories.
2. Turn ignition switch to ON.
3. Turn the key to the START position.
4. Do not press the accelerator when starting the engine.
5. When the engine starts, release the key.
6. Monitor idle speed. The idle speed will adjust as the
engine reaches operating temperature.
Check all
gauges during warm-up.
7. For minimum oil pressure at idle, refer to the Engine
Operation and Maintenance Manual . If oil pressure is
below specification, the low oil pressure warning lamp
may illuminate along with an AMBER lamp.
8. During normal engine operation the low oil pressure
lamp will illuminate if minimum oil pressure is not met.
If the lamp remains illuminated for an extended period
of time, a derate may occur.
NOTE: If the engine starts and then stops, repeat engine
starting procedure.
If more than three attempts are
required, contact your nearest service center to schedule
service.
Clear Flooded Engine
If the engine does not start normally, It could be that the engine is
flooded with gasoline. Perform the following to start the engine:
1. Apply the parking brake. Place the transmission in the
Park or Neutral Position. Turn OFF headlights and all
accessories.
2. Press down on the accelerator pedal.
3. Turn the ignition to the START position for no more than 15
seconds.
4. Once the engine has started, release the accelerator pedal.
5. Repeat Steps 2 and 3 as needed, allow starter motor to cool
down between attempts.
112