IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 179 / 241

Maintenance Instructions
Follow the these precautions:
• Always wear a respirator approved by the National
Institute of Occupational Safety and Health (NIOSH)
or the Occupational Safety and Health Administration
(OSHA) during all brake service procedures. Wear the
respirator during removal of the wheels until assembly is
complete.
• Never use compressed air or dry brushing to clean brake
parts or assemblies.
• Clean brake parts and assemblies in the open air. During
disassembly, carefully place all the parts on the floor to
avoid getting dust in the air. Use an industrial vacuum
cleaner with a High Efficiency Particulate Air (HEPA)
filter system to clean dust from the brake rotors / drums,
backing plates and other brake parts. After using the
vacuum, remove any remaining dust with a rag soaked
with water and wrung until nearly dry.
• NEVER use compressed air or dry sweeping to clean
the work area. Use an industrial vacuum cleaner with a
HEPA filter system and rags soaked in water and wrung
until nearly dry. Carefully dispose of used rags to avoid
getting dust into the air. Use an approved respirator when
emptying vacuum cleaners and handling used rags.
• Wash your hands before eating, drinking or smoking.
Vacuum work clothes exposed to brake dust after every
use and launder them separately, without shaking them,
to prevent dust from getting in the air.
Air Brakes
Brake Inspection and Adjustment
WARNING
To prevent personal injury and / or death, or
property damage, always install wheel chocks
when manually releasing the spring brakes, or
the vehicle could roll.
WARNING
To prevent personal injury and / or death, or
property
damage, under no circumstances
should a spring brake chamber be disassembled.
Disassembly will release a powerful spring.
165