IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 171 / 241

Maintenance Instructions
SECTION 13 — MAINTENANCE INSTRUCTIONS
Preface
WARNING
To prevent personal injury and / or death, or
property damage, observe the following.
If
the owner / operator of the vehicle is a skilled
technician and intends to perform the vehicle
maintenance and servicing, they are strongly
urged to purchase and follow the appropriate IC
Bus
®
service information or Allison Transmission
service information.
WARNING
To prevent personal injury and / or death, or
property damage, observe the following.
This
vehicle has many parts dimensioned in the
metric system as well as the English system.
Some fasteners are metric and are very close
in dimension to English fasteners in the inch
system. Mismatched or incorrect fasteners can
loosen and reduce clamping load.
Your bus has been engineered and manufactured to provide
economical and trouble free service. However, it is the owner's
responsibility to make sure the vehicle receives proper care and
maintenance.
IC Bus ® service parts are available through your IC Bus ® dealer.
If IC Bus ® service parts are not used, the owner must make sure
the parts used are an equivalent.
As with any machine, take care to avoid being injured when
performing maintenance, repairs or inspections.
Improper
or incomplete service could result in the vehicle not working
properly which, in turn, may result in personal injury, damage to
the vehicle or its equipment, or death. If you have any questions
about performing some service, contact your nearest IC Bus
bus dealer or have the service done by a skilled professional
technician.
Maintenance Guidelines
When servicing your bus, always:
• Turn OFF the engine unless the procedure calls for a
running engine.
• Set the parking brake and install wheel chocks.
• Use support stands, not a jack, whenever you must be
under a raised vehicle.
• Do not smoke.
• Wear safety glasses for eye protection.
• Operate the engine only in a well ventilated area.
• Do not work on brakes unless the proper precautions
have been taken to avoid inhaling friction material dust.
157