IC Bus Gasoline CE Series, Руководство по эксплуатации и обслуживанию

Страница: 81 / 241

Passenger Control
Driver Visual Warning Lights and Indicators
The driver's visual warning lights, located in the instrument
panel gauge cluster, indicate the operation of the eight lamp
warning system (either AMBER or RED), the wheelchair lift door
indicator, and other optional equipment.
Each indicator only comes on when the respective light or switch
is activated.
EXTERIOR LIGHT MONITOR (OPTIONAL) : The light monitor
is mounted in the overhead console panel.
Audible Warning Buzzer
The audible warning device buzzer is activated when the
rear emergency door, roof hatch (if equipped with a buzzer),
emergency exit windows, or side emergency doors are open
with the ignition switch in the ON or ACC (Accessory) position.
Post-Trip Inspection (No Student Left Behind)
SYSTEM PURPOSE
It is the driver's responsibility to check for children who may be
left on the bus at the end of every trip. The Post-Trip Inspection
(No Student Left Behind) System is intended to be an aid to
the driver to ensure that this responsibility is not inadvertently
omitted. The system provides audible and visual alerts when
the bus ignition is turned off at the end of a trip.
SYSTEM FUNCTION
Any time the ignition key is in the ON position and the RED
flashers have been turned ON and the door is opened (or is
already open), the system will be automatically activated. Once
the system is activated, it will trigger the vehicle alarm when the
ignition is in the OFF position for greater than half a second. At
this time, the instrument panel gauge cluster alarm will begin
to beep and the headlights will flash to remind the driver to
complete the Post-Trip Inspection (No Student Left Behind)
deactivation process.
If the deactivation is not completed
within 60 seconds, the horn will also begin to honk.
67