IBM Z10 BUISNESS CLASS Z10 BC Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 132

background image

Information concerning non-IBM products was obtained from the suppliers of those
products, their published announcements or other publicly available sources. IBM
has not tested those products and cannot confirm the accuracy of performance,
compatibility or any other claims related to non-IBM products. Questions on the
capabilities of non-IBM products should be addressed to the suppliers of those
products.

All statements regarding IBM's future direction or intent are subject to change or
withdrawal without notice, and represent goals and objectives only.

All IBM prices shown are IBM's suggested retail prices, are current and are subject
to change without notice. Dealer prices may vary.

This information is for planning purposes only. The information herein is subject to
change before the products described become available.

This information contains examples of data and reports used in daily business
operations. To illustrate them as completely as possible, the examples include the
names of individuals, companies, brands, and products. All of these names are
fictitious and any similarity to the names and addresses used by an actual business
enterprise is entirely coincidental.

If you are viewing this information softcopy, the photographs and color illustrations
may not appear.

Trademarks

IBM, the IBM logo, and ibm.com

®

are trademarks or registered trademarks of

International Business Machines Corporation in the United States, other countries,
or both. If these and other IBM trademarked terms are marked on their first
occurrence in this information with a trademark symbol (

®

or

™

), these symbols

indicate U.S. registered or common law trademarks owned by IBM at the time this
information was published. Such trademarks may also be registered or common law
trademarks in other countries. A current list of IBM trademarks is available on the
web at “Copyright and trademark information” at www.ibm.com/legal/us/en/
copytrade.shtml.

InfiniBand is a trademark of the INFINIBAND Trade Association.

Other company, product, or service names may be trademarks or service marks of
others.

Electronic emission notices

The following statements apply to this IBM product. The statement for other IBM
products intended for use with this product will appear in their accompanying
manuals.

Federal Communications Commission (FCC) Statement

Note:

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions contained in the

Level 03c, May 2011

114

z10 BC IMPP

«
...
124
125
126
127
128
...
»

Содержание Z10 BUISNESS CLASS Z10 BC





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z10 BUISNESS CLASS Z10 BC

Бренд: Aastra Страницы: 592

Бренд: Vicon Страницы: 2

Бренд: Digital Equipment Страницы: 73

Бренд: Axel Страницы: 28

UniServer R4900 G3

Бренд: H3C Страницы: 24

System x3650 M5

Бренд: IBM Страницы: 1010

Бренд: AC&T System Страницы: 32

BocaVision WT120

Бренд: Boca Systems Страницы: 28

Бренд: t.a.c. Страницы: 36

HL-3400CN Series

Бренд: Brother Страницы: 280

Бренд: Brother Страницы: 308

2200W - NC Print Server

Бренд: Brother Страницы: 75

Бренд: Brother Страницы: 148

HL-3400CN Series

Бренд: Brother Страницы: 8

Бренд: Dell Страницы: 396

Бренд: Dell Страницы: 180

EqualLogic PS6010

Бренд: Dell Страницы: 57

PowerVault 700N

Бренд: Dell Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды