IBM Z10 BUISNESS CLASS Z10 BC, Руководство по установке

Страница: 105 / 132

IBM standard symbols
801
503
800
504
In Plan Views:
In Cabling Schematics:
Hinged Covers
Power cords are supplied in 4.2 m (14 ft) lengths
unless otherwise noted on the specification page.
The length is measured from the symbol
or .
Cable Entry and Exit Area in the
base of the machine. Locating
dimensions are measured from
the edge of the frame, not the
cover. This does not indicate the
floor cutout.
Power Cord exit, 50/60 Hz
Power Cord exit, 400 Hz
Swinging Gate
Optional equipment outline
Customer Engineer
Indicator Panel
Indicates a cable group
coming from a machine
Indicates a cable group
going to a machine
Standard equipment outline
(shows the machine with covers closed)
Cable Exit Area, recommended
Legs
Non-raised floor cable exit
Meter location
Unit Emergency Switch
Single
Bifold
Offset Bifold
(Without
feature)
Service Area Boundary
(Service clearances are measured
from the machine with covers closed)
Casters
Locating dimensions are measured
from the edge of the frame, not the cover.
Locating dimensions are measured
from the edge of the frame, not the cover.
Leveling pads or glides
(90 mm [3 1/2 in] typical diameter)
Level 03c, May 2011
© Copyright IBM Corp. 2008, 2011
93