IBM xSeries 260, Руководство пользователя

Страница: 69 / 312

To load the 12/24GB 4mm cleaning cartridge, do the following:
1. Grasp the edges of the 12/24GB 4mm cleaning cartridge with the window side of
the cartridge facing up.
2. Slide the cleaning cartridge into the opening on the front of the 12/24GB 4mm
tape drive until the loading mechanism pulls the cartridge into the drive.
4-mm Cleaning Cartridge
Window Side of
Cleaning Cartridge
Unload Button
Disturbance Status
Light (Amber)
After the 12/24GB 4mm cleaning cartridge has been fully inserted into the 12/24GB
4mm Tape Drive, the following cleaning operations are performed automatically:
1. The cleaning tape is loaded into the tape path.
The cleaning cycle lasts approximately 30 seconds.
2. The tape is unloaded and the cleaning cartridge is ejected from the tape drive
when the cleaning operation is complete.
3. A successful cleaning operation is indicated when the disturbance status light
(amber) goes off (if it was activated before the cleaning operation).
Chapter 2. Using the System Unit
2-37