IBM xSeries 260, Руководство пользователя

Страница: 22 / 312

Before You Begin
Ÿ
Make sure you have an adequate number of properly grounded electrical outlets
for your system, display, and any other options you intend to install.
Ÿ
Place your system in a location that is dry. This system, with its tape and disk
drive components, operates in a environment having a non-condensing humidity
range between 8% and 80%, with the wet-bulb temperature of 23 degrees C (73
degrees F).
Ÿ
Operating temperature range is from 16 degrees C to 32 degrees C (60 degrees
F to 90 degrees F).
Ÿ
The smaller the variation of temperature and humidity within their operating
ranges, the longer life of the system and its components. The room in which
your system is installed should be tuned for optimum human and system comfort
levels to promote reliability (25 degrees C, 45% relative humidity). If these levels
are exceeded, you may experience system failures or emergency power-off
warnings.
Ÿ
Always operate your system in the upright position and do not place any heavy
objects on top of your system.
Ÿ
Collect the following tools, and keep them handy:
– Small flat-blade screwdriver
– Medium flat-blade screwdriver
– Trays to hold screws
– Optional tools:
- 4.0 mm nutdriver
- 5.0 mm nutdriver
- 5.5 mm nutdriver
- screw starter
Ÿ
Before continuing, refer to the System Unit Safety Information book for Danger
and Caution notices. Do not plug any cables into system unit, adapters, or
electrical outlets until you have reviewed this information.
Make sure none of the power cords are connected before continuing.
1-2
User's Guide