IBM xSeries 260, Руководство пользователя

Страница: 240 / 312

General User Menus
The menu options presented to the General user are a subset of the options
available to the Privileged user. The user must know the General Access Password
in order to access these menus.
à ð
GENERAL USER MENU
1. Power-On System
2. Read VPD Image from Last System Boot
3. Read Progress Indicators from Last System Boot
4. Read Service Processor Error Logs
5. Read System POST Errors
6. View System Environmental Conditions
99. Exit from Menus
1>
á ñ
Note: The Service Processor prompt reads either 1> or 2> to indicate which serial
port on the system unit is being used to communicate with the Service
Processor.
Ÿ
Power-On System
Allows the user to power-on the system.
Ÿ
Read VPD Image from Last System Boot
Displays the VPD information that was in effect after the last system boot. This
information is usually identical with the results from the menu selection "Read
VPD," but in the case of configuration updates or certain faults, this historical
comparison can be useful to System Administrators and service personnel.
Ÿ
Read Progress Indicators from last Boot
Displays the boot progress indicators (check points), up to a maximum of 100,
from the system boot prior to the one in progress now. This historical
information may be useful to help diagnose system faults.
The progress indicators are displayed in two sections. Above the dashed line
are the progress indicators (latest) from the boot that produced the current
sessions. Below the dashed line are progress indicators (oldest) from the boot
preceding the one that produced the current sessions.
The progress indication codes are listed top (latest) to bottom (oldest). The
dashed line merely represents the point where the latest boot started.
Use the posted code indicated by the <-- arrow.
C-4
User's Guide