IBM xSeries 260, Руководство пользователя

Страница: 196 / 312

Notes:
Ÿ
This task is supported in Stand-alone Diagnostics only.
Ÿ
Process and test one resource at a time.
Ÿ
Do not process multiple supplementals at a time.
Run Diagnostics
The Run Diagnostics task invokes the Resource Selection List menu. When the
commit key is pressed, Diagnostics are run on all selected resources.
The procedures for running the diagnostics depends on the state of the diagnostics
run time options. See “Display or Change Diagnostic Run Time Options” on
page 6-17.
Run Error Log Analysis
The Run Error Log Analysis task invokes the Resource Selection List menu. When
the commit key is pressed, Error Log Analysis is run on all selected resources.
Run Exercisers
This task provides a tool to troubleshoot intermittent system problems on AIX
Release 4.3.2 or later. This task provides an exerciser supervisor that controls the
selected exercisers.
When you select Run Exercisers from the Task Selection menu, the EXERCISER
SELECTION menu displays. Select the exerciser you want to run from this menu.
Each exerciser has other menus to set options for the exerciser.
Exerciser Commands (CMD)
Use the following commands as needed in the exerciser menus and reports. Not all
commands are available in each menu or report.
CMD Description
a Acknowledge an error.
b Back one page.
c Toggle between cycle count and last error.
6-30
User's Guide