IBM xSeries 260, Руководство пользователя

Страница: 253 / 312

Ÿ
Memory Configuration/Deconfiguration Menu
This option allows the user to see and modify memory configuration.
The following is an example of the Processor Configuration/Deconfiguration
Menu:
à ð
MEMORY CONFIGURATION/DECONFIGURATION MENU
DIMMs on Memory Card #ð:
DIMMs on Memory Card #1:
1. Configured by system (ðxð)
98. Return to Previous Menu
Enter card number _AND_ DIMM number separated by a space.
1>
á ñ
The user can manually configure or deconfigure any memory DIMM, regardless
of failure status, through this Service Processor menu. The configuration
process takes place during the system power-up. Therefore, the configuration
displayed in STANDBY mode reflects the configuration during the last boot. To
view the current configuration, access the Service Processor menu after the
system boots up. When the user selects a memory DIMM, its state will toggle
between configured and deconfigured. Memory DIMMs that are not present are
not listed. A memory DIMM can be in any of the following four states:
– Configured by System: The memory DIMM is present, and has not
exceeded the number of failure threshold. It is configured by the system and
is available.
– Deconfigured by System: The memory DIMM is present, but has exceeded
the number of failure threshold. It is deconfigured by the system and is
currently unavailable.
– Manually configured: The memory DIMM is present and available. It is
configured by the user through the Service Processor menus.
– Manually deconfigured: The memory DIMM is present, but unavailable. It
has been deconfigured by the user through the Service Processor menus.
Appendix C. Service Processor Information
C-17