IBM System x3610, Руководство по диагностике и обслуживанию

Страница: 25 / 144

Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
1
2
The server can be turned off in any of the following ways:
v You can turn off the server from the operating system, if your operating system
supports this feature. After an orderly shutdown of the operating system, the
server will be turned off automatically.
v
You can press the power-control button to start an orderly shutdown of the
operating system and turn off the server, if your operating system supports this
feature.
v
If the operating system stops functioning, you can press and hold the
power-control button for more than 4 seconds to turn off the server.
v The service processor can turn off the server as an automatic response to a
critical system failure.
v
You can turn off the server through a request from the service processor.
Internal connectors, LEDs, and switches
The illustrations in this section show the LEDs, connectors, and switches (buttons)
on the internal boards. The illustrations might differ slightly from your hardware.
Chapter 1. Introduction
7