IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 54 / 257

3-10
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Figure 3-9. Creating the rail assemblies
6. Install the rail assemblies into the rack (Figure 3-10). Ensure the three holes in the
front of the unit align with the 1U space marked on the vertical rails in Step 2.
Secure the rails to the rack using four flat-head screws on each side of the rack.
Use both of the two screw locations on the rear of the rack rail (Figure 3-6). Use
the
top and middle screw locations on the front of the rack rail (Figure 3-5).
Figure 3-10. Installing the rail assemblies
a29z0018
7
9
a29z0020
9
9