IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 16 / 257

xiv
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Laser Safety and Compliance
Before using the library, review the following laser safety information.
Class I Laser Product
The library may contain a laser assembly that complies with the performance
standards set by the U.S. Food and Drug Administration for a Class I laser product.
Class I laser products do not emit hazardous laser radiation. The library has the
necessary protective housing and scanning safeguards to ensure that laser radiation is
inaccessible during operation or is within Class I limits. External safety agencies have
reviewed the library and have obtained approvals to the latest standards as they
apply.
Performing the Safety Inspection Procedure
Before you service the unit, perform the following safety inspection procedure:
1.
Stop all activity between the host and the library’s tape drive.
2.
Turn off the power to the library by switching the Power button on the rear of the
tape library to the Off position.
3.
Disconnect the tape drive’s SAS cable.
4.
Unplug the library’s power cord from the electrical outlet and the library’s power
supply unit.
5.
Check the library’s power cords for damage, such as a pinched, cut, or frayed
cord.
6.
Check the tape drive’s SAS cable for damage.
7.
Check the cover of the library for sharp edges, damage, or alterations that expose
its internal parts.
8.
Check the cover of the library for proper fit. It should be in place and secure.
9.
Check the product label at the rear of the library to make sure it matches the
voltage at your outlet.
A hazardous condition due to the weight of the unit. Weight
symbols are accompanied by an approximation of the
product’s weight.
If the symbol is… It means…
18-32 kg (39.7-70.5 lbs)
s
vc00167