IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 40 / 257

2-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
b. Press the Enter key to highlight the next editable digit.
3. Press the Enter key at the last digit to apply the complete entry, or press the
Cancel key to cancel the whole edit process and maintain the original value.
Logging in
At power ON or software reset, the library ready screen appears when POST
initialization completes successfully.
Figure 2-2. Library ready screen
To log in to the Operator Panel, press the Enter key. The password entry screen
appears.
Figure 2-3. Password entry screen
Press the UP and DOWN arrow keys to change the current digit. Press the Enter key
to advance to the next digit. The default password is
0000 . Once you have logged in,
you can change the password using the Change Login Password command. See
“Configuring Operator Panel Settings” on page 4-11.
Screen Elements
Figure 2-4. Screen elements
The Operator Panel display a single menu item ( in Figure 2-4) on each screen. The
existence of other menu items above and below the currently displayed item is
indicated by the arrows ( in Figure 2-4) on the right side of the screen.
In the Configuration menu, the current configuration setting is indicated by an
asterisk ( in Figure 2-4) on the right side of the screen. For example, in Figure 2-4,
the I/O Station is currently enabled. When changing a configuration setting, the
confirmation screen in Figure 2-5 appears. Press the Enter key to confirm, or Cancel to
return to the previous screen.
a29z0028
a29z0029
2
1
a29z0030
3
1
2
3