IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 127 / 257

Chapter 5. Media
5-13
Figure 5-9. Placing the dislodged leader pin into the correct position
The cartridge door is open to show the leader pin.
5. To rewind the tape, insert the cartridge manual rewind tool ( in Figure 5-10)
into the cartridge’s hub and turn it clockwise until the tape becomes taut.
Figure 5-10. Rewinding the tape into the cartridge
6. Remove the rewind tool by pulling it away from the cartridge.
7. If you suspect that the cartridge has been mishandled but it appears usable, copy
any data onto a good cartridge immediately for possible data recovery. Discard
the mishandled cartridge.
Reattaching a Leader Pin
The first meter of tape in a cartridge is leader tape. Once the leader tape has been
removed there is a possibility of tape breakage. After reattaching the leader pin,
transfer data from the defective tape cartridge.
Do not reuse the defective tape
cartridge.
1
2