IBM Power System System E950, Руководство пользователя

Страница: 30 / 56

Removing an NVMe U.2 drive from the 9040-MR9 system
To remove an NVMe U.2 drive from the system, complete the steps in this procedure.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. To remove an NVMe U.2 drive from the system, complete the following steps:
a) Press the release latch (A) in the direction that is shown to release the drive handle (B).
(L007)
CAUTION: A hot surface nearby. (L007)
b) Support the bottom of the NVMe U.2 drive as you slide the drive out of the system, holding the drive
by its sides.
16 Power Systems: NVMe U.2 drives for the 9040-MR9