manualshive.com logo in svg

IBM Power 720 Express, Обзор

IBM Power 720 Express - Мощный сервер для вашего бизнеса. Скачайте бесплатно руководство по установке и эксплуатации нашего продукта с нашего {веб-сайта}. Идеальный выбор для вашего предприятия.

Поделиться
Скачать
background image

Chapter 4. Continuous availability and manageability 

181

With the Power-On Reset Engine (PORE), the firmware can now dynamically power off 
processor components, make changes to the registers and re-initialize while the system is 
running, without discernible impact to any applications running on a processor. This 
potentially allows concurrent firmware changes in , which in earlier designs, 
required a reboot to take effect.

Activating some new firmware functions requires installation of a firmware release level. This 
process is disruptive to server operations and requires a scheduled outage and full server 
reboot.

4.4.4  Electronic Services and Electronic Service Agent

IBM transformed its delivery of hardware and software support services to help you achieve 
higher system availability. Electronic Services is a web-enabled solution that offers an 
exclusive, no-additional-charge enhancement to the service and support available for IBM 
servers. These services provide the opportunity for greater system availability with faster 
problem resolution and preemptive monitoring. The Electronic Services solution consists of 
two separate, but complementary, elements:

򐂰

Electronic Services news page

The Electronic Services news page is a single Internet entry point that replaces the 
multiple entry points, which are traditionally used to access IBM Internet services and 
support. The news page enables you to gain easier access to IBM resources for 
assistance in resolving technical problems.

򐂰

Electronic Service Agent

The Electronic Service Agent is software that resides on your server. It monitors events 
and transmits system inventory information to IBM on a periodic, client-defined timetable. 
The Electronic Service Agent automatically reports hardware problems to IBM.

Early knowledge about potential problems enables IBM to deliver proactive service that can 
result in higher system availability and performance. In addition, information that is collected 
through the Service Agent is made available to IBM service support representatives when 
they help answer your questions or diagnose problems. Installation and use of IBM Electronic 
Service Agent for problem reporting enables IBM to provide better support and service for 
your IBM server.

To learn how Electronic Services can work for you, visit the following site; an IBM ID is 
required:

http://www.ibm.com/support/electronic

Benefits are as follows:

򐂰

Increased uptime

The Electronic Service Agent tool is designed to enhance the warranty or maintenance 
agreement by providing faster hardware error reporting and uploading system information 
to IBM Support. This can translate to less wasted time monitoring the symptoms, 
diagnosing the error, and manually calling IBM Support to open a problem record.

Its 24x7 monitoring and reporting mean no more dependence on human intervention or 
off-hours customer personnel when errors are encountered in the middle of the night.

򐂰

Security

The Electronic Service Agent tool is designed to be secure in monitoring, reporting, and 
storing the data at IBM. The Electronic Service Agent tool securely transmits either with 

Содержание Power 720 Express















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power 720 Express

Ganz GH Series Instruction Manual preview
GH Series
Бренд: Ganz Страницы: 8
Proto J138RSH Operation And Maintenance Manual preview
J138RSH
Бренд: Proto Страницы: 8
Parkside 315570 Translation Of The Original Instructions preview
315570
Бренд: Parkside Страницы: 49
Pepperl+Fuchs KF**-CRG2-1.D Series Manual preview
KF**-CRG2-1.D Series
Бренд: Pepperl+Fuchs Страницы: 38
UFO NSD9021 Instruction Manual preview
NSD9021
Бренд: UFO Страницы: 8
U.S. General 54425 Assembly And Operating Instructions Manual preview
54425
Бренд: U.S. General Страницы: 10
Agilent Technologies E3614A Operating And Service Manual preview
E3614A
Бренд: Agilent Technologies Страницы: 47
Velleman-Kit K2570 Illustrated Assembly Manual preview
K2570
Бренд: Velleman-Kit Страницы: 8
TDK-Lambda EZA2500FC Instruction Manual preview
EZA2500FC
Бренд: TDK-Lambda Страницы: 23
Stanley Fat Max FME340 Manual preview
Fat Max FME340
Бренд: Stanley Страницы: 84
Maker Life BSEL0003 Quick Manual preview
BSEL0003
Бренд: Maker Life Страницы: 3
YOKOGAWA PUS400G User Manual preview
PUS400G
Бренд: YOKOGAWA Страницы: 31
WORKERS BEST WB 1200 OF Manual preview
WB 1200 OF
Бренд: WORKERS BEST Страницы: 159
KEPCO HSF-1UR 50W Series Instruction Manual preview
HSF-1UR 50W Series
Бренд: KEPCO Страницы: 7
Stanley LaBounty MRP Safety, Operation & Maintenance Instructions preview
LaBounty MRP
Бренд: Stanley Страницы: 24
Xantrex XDL 35-5 Operating Manual preview
XDL 35-5
Бренд: Xantrex Страницы: 163
Zato CAYMAN FCE II Series Safety, Operation And Maintenance Manual preview
CAYMAN FCE II Series
Бренд: Zato Страницы: 96
Jet HP-5A Parts List preview
HP-5A
Бренд: Jet Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды