manualshive.com logo in svg

IBM Power 720 Express, Обзор

IBM Power 720 Express - Мощный сервер для вашего бизнеса. Скачайте бесплатно руководство по установке и эксплуатации нашего продукта с нашего {веб-сайта}. Идеальный выбор для вашего предприятия.

Поделиться
Скачать
background image

22

 

IBM Power 720 and 740  Technical Overview and Introduction

With an IBM Edition for the Power 740, processor activations for the processor card options 
are as follows:

򐂰

One or two 4.2 GHz 6-core processor modules (FC EPCP) with 3 x FC EPDP 
(chargeable) and 3 x FC EPEP (no-charge) for each processor module.

򐂰

One or two 3.6 GHz 8-core processor modules (FC EPCQ) with 4 x FC EPDQ 
(chargeable) and 4 x FC EPEQ (no-charge) for each processor module.

򐂰

One or two 4.2 GHz 8-core processor modules (FC EPCR) with 4  x FC EPDR 
(chargeable) and 4 x FC EPER (no-charge) for each processor module.

The Power 740 (8205-E6D) contains either one or two processor modules. IBM Edition is 
available on the Power 740 with either one or two processor modules.

When you purchase an IBM Edition, you must purchase an AIX or IBM i operating system 
license, or you may choose to purchase the system with or without a Linux operating system. 
The AIX, IBM i, or Linux operating system is processed with a feature code on one of the 
following systems:

򐂰

AIX 6.1, or AIX 7.1

򐂰

IBM i 6.1.1 or IBM  i 7.1

򐂰

SUSE Linux Enterprise Server or Red Hat Enterprise Linux

If you choose AIX 6.1 or AIX 7.1 for your primary operating system, you can also order 
IBM i 6.1.1 or IBM i 7.1 and SUSE Linux Enterprise Server or Red Hat Enterprise Linux. The 
converse is true if you choose an IBM i or Linux subscription as your primary OS.

These sample configurations can be changed as needed and still qualify for processor 
entitlements at no additional charge. However, selection of total memory, HDD, SSD, Fibre 
Channel, or FCoE adapter quantities that are smaller than the totals defined as the minimum 
amounts disqualifies the order as an IBM Edition, and the no-charge processor activations 
are then removed. 

Consider the following minimum definitions for IBM Edition:

򐂰

For Power 720, a minimum of 2 GB of memory per core is needed to qualify for the 
IBM Edition. There can be different valid memory configurations that meet the 
minimum requirement.

򐂰

For the Power 740, a minimum of 4 GB of memory per core is needed to qualify for the 
IBM Edition. For example, a 6-core minimum is 24 GB, and an 8-core minimum is 32 GB. 
Different valid memory configurations meet the minimum requirement 

Additionally, a minimum of two HDD, two SSD, two Fibre Channel adapters, or two Fibre 
Channel over Ethernet (FCoE) adapters is required. You must meet only one of the following 
disk, SSD, Fibre Channel, or FCoE criteria. Partial criteria cannot be combined.

򐂰

Two SAS HDDs; any capacity drives located in the system unit, FC 5802, FC 5886, or 
FC 5887 expansion drawers qualify.

򐂰

Two SAS SSDs; any capacity drives located in the system unit, FC EDR1, FC 5802, 
FC 5886, FC 5887 expansion drawers qualify.

򐂰

Two SSD Modules with eMLC (FC 1995 or FC 1996); modules located in the system unit 
with FC 2053 or FC 2054, or in FC 5802 or FC 5887 DASD drawer with FC 2055 qualify.

򐂰

Two Fibre Channel adapters; either PCI-X or PCIe adapters located in the system unit or 
12X-attached I/O drawer qualify.

򐂰

Two Fibre Channel over Ethernet adapters, located in the system unit or PCIe 
12X-attached I/O drawer qualify.

Содержание Power 720 Express















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power 720 Express

GE EPS 3501 XL Operating Instructions Manual preview
EPS 3501 XL
Бренд: GE Страницы: 50
Fein FMT250 Repair Instructions preview
FMT250
Бренд: Fein Страницы: 30
Fein AGWP10 Instruction Manual preview
AGWP10
Бренд: Fein Страницы: 61
Federal Signal Corporation PS1000 Installation And Maintenance Manual preview
PS1000
Бренд: Federal Signal Corporation Страницы: 12
Levolta iX05 black edition User Manual preview
iX05 black edition
Бренд: Levolta Страницы: 14
Genesys GEN 1500W SERIES User Manual preview
GEN 1500W SERIES
Бренд: Genesys Страницы: 76
Earlex HG 1600K Operating Instructions preview
HG 1600K
Бренд: Earlex Страницы: 5
HIKOKI DS 36DAX Handling Instructions Manual preview
DS 36DAX
Бренд: HIKOKI Страницы: 24
Sears Craftsman 113.213850 Owner'S Manual preview
Craftsman 113.213850
Бренд: Sears Страницы: 24
Northern 999320 Owner'S Manual preview
999320
Бренд: Northern Страницы: 11
Enerpac PTW1000 Instruction Sheet preview
PTW1000
Бренд: Enerpac Страницы: 16
Elektro-Automatik EA-3048B Quick Start Manual preview
EA-3048B
Бренд: Elektro-Automatik Страницы: 4
Stanley SJ45 Original Instructions Manual preview
SJ45
Бренд: Stanley Страницы: 12
YATO YT-82834 Original Instructions Manual preview
YT-82834
Бренд: YATO Страницы: 101
Brähler Systems DIGIMIC DExt Quick Manual preview
DIGIMIC DExt
Бренд: Brähler Systems Страницы: 4
Grad-M 90041180 User Manual preview
90041180
Бренд: Grad-M Страницы: 28
Zipper Mowers ZI-BR160 Operation Manual preview
ZI-BR160
Бренд: Zipper Mowers Страницы: 46
Fencee Energy DUO RF EDX80 Instructions For Use Manual preview
Energy DUO RF EDX80
Бренд: Fencee Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды