manualshive.com logo in svg

IBM Power 720 Express, Обзор

IBM Power 720 Express - Мощный сервер для вашего бизнеса. Скачайте бесплатно руководство по установке и эксплуатации нашего продукта с нашего {веб-сайта}. Идеальный выбор для вашего предприятия.

Поделиться
Скачать
background image

78

 

IBM Power 720 and 740  Technical Overview and Introduction

Supported RAID functions

Base hardware supports RAID 0, 1, and 10. When additional features are configured, 
Power 720 and Power 740 support hardware RAID 0, 1, 5, 6, and 10:

򐂰

RAID 0 provides striping for performance, but does not offer any fault tolerance.

The failure of a single drive results in the loss of all data on the array. This version 
increases I/O bandwidth by simultaneously accessing multiple data paths.

򐂰

RAID 1 mirrors the contents of the disks. The contents of each disk in the array are 
identical to that of every other disk in the array. This version provides data resilience in the 
case of a drive failure.

򐂰

RAID 5 uses block-level data striping with distributed parity.

RAID 5 stripes both data and parity information across three or more drives. Fault 
tolerance is maintained by ensuring that the parity information for any given block of data 
is placed on a drive that is separate from those that are used to store the data itself. This 
version provides data resiliency in the case of a single drive failing in a RAID 5 array.

򐂰

RAID 6 uses block-level data striping with dual distributed parity.

RAID 6 is the same as RAID 5 except that it uses a second level of independently 
calculated and distributed parity information for additional fault tolerance. RAID 6 
configuration requires N+2 drives to accommodate the additional parity data, which makes 
it less cost effective than RAID 5 for equivalent storage capacity. This version provides 
data resiliency in the case of one or two drives failing in a RAID 6 array.

򐂰

RAID 10 is also known as a striped set of mirrored arrays.

It is a combination of RAID 0 and RAID 1. A RAID 0 stripe set of the data is created across 
a two disk array for performance benefits. A duplicate of the first stripe set is then mirrored 
on another 2-disk array for fault tolerance. This version provides data resiliency in the case 
of a single drive failure and may provide resiliency for multiple drive failures.

2.8.2  External SAS port and split backplane 

This section describes the external SAS port and split backplane features.

External SAS port feature

The Power 720 and Power 740 DASD backplane (FC EJ01) offers an external SAS port:

򐂰

The SAS port connector is located next to the GX++ slot 2 on the rear bulkhead.

򐂰

The external SAS port can be used to connect external SAS devices (FC 5886 or 
FC 5887), the IBM System Storage 7214 Tape and DVD Enclosure Express (Model 1U2), 
or the IBM System Storage 7216 Multi-Media Enclosure (Model 1U2).

Split DASD backplane feature

The Power 720 and Power 740 DASD backplane (FC 5618) supports split drive bay 
(FC EJ02). If FC EJ02 is configured, then the six small form factors (SFFs) slots are split into 
a pair of three drive bay groups (3x3).

Note: Only one SAS drawer is supported from the external SAS port. Additional SAS 
drawers can be supported by SAS adapters. SSDs are not supported on the SAS drawer 
connected to the external port.

Содержание Power 720 Express















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power 720 Express

Oasser P1 Operation Manual preview
P1
Бренд: Oasser Страницы: 29
SafetySpeed C4 Owner'S Manual preview
C4
Бренд: SafetySpeed Страницы: 43
Q-tran QTM-DRIVE Installation preview
QTM-DRIVE
Бренд: Q-tran Страницы: 5
Facom CL3.CTB50 Original Instructions Manual preview
CL3.CTB50
Бренд: Facom Страницы: 56
Omer 80.16 ROC2 Instructions Manual preview
80.16 ROC2
Бренд: Omer Страницы: 26
King Industrial CT-204 Service Manual preview
CT-204
Бренд: King Industrial Страницы: 7
CCS PDS-30 Instruction Manual preview
PDS-30
Бренд: CCS Страницы: 24
Sanela SLZ 07 Mounting Instructions preview
SLZ 07
Бренд: Sanela Страницы: 2
Batavia 7064216 Operating Instructions Manual preview
7064216
Бренд: Batavia Страницы: 46
Jet JJ-6HHDX Operating Instructions And Parts Manual preview
JJ-6HHDX
Бренд: Jet Страницы: 40
Chicago Electric 61737 Owner'S Manual & Safety Instructions preview
61737
Бренд: Chicago Electric Страницы: 16
Ingersoll-Rand QiP Series Product Information preview
QiP Series
Бренд: Ingersoll-Rand Страницы: 56
Steel City 40540 User Manual preview
40540
Бренд: Steel City Страницы: 32
Kaidi KDDY001B Instruction Manual preview
KDDY001B
Бренд: Kaidi Страницы: 12
Hander HJS-710-L User Manual preview
HJS-710-L
Бренд: Hander Страницы: 38
MAC TOOLS MPF59025 Instruction Manual preview
MPF59025
Бренд: MAC TOOLS Страницы: 32
Parkside 306436 Translation Of The Original Instructions preview
306436
Бренд: Parkside Страницы: 55
p-light Maxi XL Magnum HydroComp Installation And Instructions For Use preview
Maxi XL Magnum HydroComp
Бренд: p-light Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды