manualshive.com logo in svg

IBM Power 720 Express, Обзор

IBM Power 720 Express - Мощный сервер для вашего бизнеса. Скачайте бесплатно руководство по установке и эксплуатации нашего продукта с нашего {веб-сайта}. Идеальный выбор для вашего предприятия.

Поделиться
Скачать
background image

2

 

IBM Power 720 and 740  Technical Overview and Introduction

1.1  Systems overview

You can find detailed information about the Power 720 and Power 740 systems within the 
following sections.

1.1.1  The Power 720 server

The Power 720 offers a choice of a 4-core, 6-core, or 8-core configuration running at 3.6 GHz, 
available in a 4U rack-mount or a tower form factor. The  processor chip in this 
server is a 64-bit, 4-core, 6-core, or 8-core module with 10 MB of L3 cache per core and 
256 KB of L2 cache per core.

The Power 720 server supports a maximum of 16 DDR3 DIMM slots, with eight DIMM slots 
included in the base configuration and eight DIMM slots available with an optional memory 
riser card. A system with the optionally installed memory riser card has a maximum memory 
of 512 GB.

The Power 720 system includes an integrated SAS controller, offering RAID 0, 1, and 10 
support; two storage backplanes are available. The base configuration supports up to six 
small form factor (SFF) SAS hard-disk drives (HDDs) or solid-state drives (SSDs), an SATA 
DVD, and a half-high tape drive. A higher-function backplane is available as an option. This 
supports up to eight SFF SAS HDDs or SSDs, an SATA DVD, a half-high tape drive, Dual 
175 MB Write Cache RAID with RAID 5 and 6 support, and an external SAS port.

All HDDs or SSDs are hot-swap and front accessible. If the internal storage capacity is not 
sufficient, additional disk I/O drawers can be attached to the system unit, providing large 
storage capacity and multiple partition support.

The Power 720 includes five Peripheral Component Interconnect (PCI) Express (PCIe) Gen2 
full-height profile slots for installing adapters in the system. Optionally, an additional riser card 
with four PCIe Gen2 low-profile (LP) slots can be installed in a GX++ slot available on the 
backplane. This option extends the number of slots to nine. The system also includes a PCIe 
x4 Gen2 slot containing a PCIe2 4-Port 10/100/1000 Base-TX Ethernet adapter.

If additional PCIe slots are required, the Power 720 supports external I/O drawers in place of 
the riser card, allowing for a maximum of two PCIe drawers (feature codes: FC 5802 and 
FC 5877). This support increases the number of available slots by 20 to 25 PCIe slots in total. 

Only the 6-core and 8-core systems support external I/O slots.

The Power 720 also implements Light Path diagnostics, which provides an obvious and 
intuitive means to positively identify failing components. With Light Path diagnostics, system 
engineers and administrators can more easily and quickly diagnose hardware problems.

An upgrade is available from an IBM POWER6® processor-based IBM Power 520 server 
(8203-E4A) to the Power 720 (8202-E4D). A Power 520 (9408-M25) can be converted to a 
Power 520 (8203-E4A) and then be upgraded to a Power 720 (8202-E4D). You can also 
directly upgrade from a Power 520 (8203-E4A) to the Power 720 (8202-E4D), preserving the 
existing serial number.

Unsupported: The Integrated Virtual Ethernet (IVE) adapter is not available for the 
Power 720.

Содержание Power 720 Express















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power 720 Express

Makita BTM40 Technical Information preview
BTM40
Бренд: Makita Страницы: 10
Makita BST220 Technical Information preview
BST220
Бренд: Makita Страницы: 9
Makita BJS160 Instruction Manual preview
BJS160
Бренд: Makita Страницы: 48
Makita BJN160 Technical Information preview
BJN160
Бренд: Makita Страницы: 8
Makita AN613 Instructions Manual preview
AN613
Бренд: Makita Страницы: 11
Makita 6912D Technical Information preview
6912D
Бренд: Makita Страницы: 5
Makita 5094D Parts List preview
5094D
Бренд: Makita Страницы: 2
Makita 4351CT Technical Information preview
4351CT
Бренд: Makita Страницы: 15
Makita 5092D Parts List preview
5092D
Бренд: Makita Страницы: 2
Makita 5046DWB Parts List preview
5046DWB
Бренд: Makita Страницы: 2
Makita 4341CT Hardware Technical Information preview
4341CT
Бренд: Makita Страницы: 14
Makita 4323 Parts Manual preview
4323
Бренд: Makita Страницы: 2
Makita 6801DB Parts List preview
6801DB
Бренд: Makita Страницы: 4
Makita DMP180 Repair Manual preview
DMP180
Бренд: Makita Страницы: 9
FAR KJ 45/S Original Instructions Manual preview
KJ 45/S
Бренд: FAR Страницы: 80
Parkside PDSP 1000 A1 SANDBLASTER GUN Operation And Safety Notes Translation Of Original Operation Manual preview
PDSP 1000 A1 SANDBLASTER GUN
Бренд: Parkside Страницы: 51
Parkside PDT 40 A1 Operation And Safety Notes Original Operating Instructions preview
PDT 40 A1
Бренд: Parkside Страницы: 56
Wayne GPS400 Operating Instructions And Replacement Parts List Manual preview
GPS400
Бренд: Wayne Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды