IBM H SERIES RS/6000, Инструкция по установке и обслуживанию

Страница: 143 / 424

Table 3-1 (Page 36 of 38). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
4B200054 The CPU cards are not compatible
with each other (i.e. one is a
166MHz and the other is a 332MHz) 1. Remove cards
2. Verify part numbers
3. Install valid cards
4B200055 No processor found 1. If only one processor card is used, it
must be in processor card connector
1.
2. If two processor cards are used:
a. Replace the card in processor
card connector 1 with the card in
processor card connector 2 and
see if the problem is resolved. If
not, proceed to the next step.
b. Replace the system board.
c. Replace the I/O board (See notes
on 3-1.)
4B200056 No CPU card in first slot 1. If only one processor card is used, it
must be in slot #1.
2. If two processor cards are used:
a. Replace the card in slot #1.
b. Replace the system board.
c. Replace the I/O board (See notes
on 3-1.)
4B200057 The CPU cards are not compatible
with each other (i.e. one is a
166MHz and the other is a 332MHz) 1. Remove cards
2. Verify part numbers
3. Install valid cards
4B200058 Compatibility test on processor card
0 failed 1. Remove cards
2. Verify part numbers
3. Install valid cards
4B200059 Compatibility test on processor card
1 failed 1. Remove cards
2. Verify part numbers
3. Install valid cards
4B20000A No configured CPU found 1. Verify compatibility of CPU cards.
2. Verify that cards are properly con-
nected.
3. Manually configure a CPU using the
Service Processor menu.
Chapter 3. Error Code to FRU Index
3-37