IBM H SERIES RS/6000, Инструкция по установке и обслуживанию

Страница: 115 / 424

Table 3-1 (Page 8 of 38). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
25A80xxx NVRAM problems NVRAM problem resolution:
1. Errors reported against NVRAM can
be caused by low Battery voltage and
(more rarely) power outages that
occur during normal system usage.
With the exception of the 25A80000
error, these errors are warnings that
the NVRAM data content had to be
re-established and do not require any
FRU replacement unless the error is
persistent. When one of these errors
occurs, any system customization (eg.
boot device list) information has been
lost, the system may need to be re-
configured.
2. If the error is persistent, replace the
battery.
3. If the error is persistent after battery
replacement, or the error code is
25A80000, replace the I/O board.
(See notes on 3-1.)
25A80000 Initialization failed, device test failed Refer to Action under error code
25A80xxx.
25A80001 Init-nvram invoked, ALL of NVRAM
initialized Refer to Action under error code
25A80xxx.
25A80002 Init-nvram invoked, some data parti-
tions may have been preserved Refer to Action under error code
25A80xxx.
25A80011 Data corruption detected, ALL of
NVRAM initialized Refer to Action under error code
25A80xxx.
25A80012 Data corruption detected, some data
partitions may have been preserved Refer to Action under error code
25A80xxx.
25A80100 NVRAM data validation check failed Turn off, turn on system unit and retry the
operation before replacing any system
component. Refer to Action under error
code 25A80xxx.
25A80201 Unable to expand target partition
while saving configuration variable Refer to Action under error code
25A80xxx.
25A80202 Unable to expand target partition
while writing error log entry Refer to Action under error code
25A80xxx.
25A80203 Unable to expand target partition
while writing VPD data Refer to Action under error code
25A80xxx.
25A80210 Setenv/$Setenv parameter error -
name contains a null character Refer to Action under error code
25A80xxx.
Chapter 3. Error Code to FRU Index
3-9