IBM H SERIES RS/6000, Инструкция по установке и обслуживанию

Страница: 158 / 424

Table 3-8 (Page 3 of 10). Firmware Checkpoints.
Checkpoint Description Action/
Possible Failing FRU
E130 Build device tree See the note on 3-43.
E131 Create ROOT node See the note on 3-43.
E132 Create cpus node See the note on 3-43.
E133 Create L2 Cache node See the note on 3-43.
E134 Create memory node See the note on 3-43.
E135 Create memory module node See the note on 3-43.
E136 Test memory See the note on 3-43.
E137 Create openprom node See the note on 3-43.
E138 Create options node See the note on 3-43.
E139 Create aliases node and system
aliases See the note on 3-43.
E13A Create packages node See the note on 3-43.
E140 PReP style load See the note on 3-43.
E149 Create boot mgr node See the note on 3-43.
E14C Create terminal-emulator node See the note on 3-43.
E14D Load boot image See “Boot Problems and Concerns”
on page 3-63.
E14E Create client interface
node/directory See the note on 3-43.
E14F NVRAM validation, config variable
token generation See the note on 3-43.
E150 Create host (primary) PCI controller
node See the note on 3-43.
E151 Probing primary PCI bus Go to “Step 1540-25” on page 2-60.
If a network adapter or I\O board is
replaced, see 3-1.
E152 Probe for adapter FCODE, evaluate
if present Go to “Step 1540-25” on page 2-60.
If a network adapter or I\O board is
replaced, see 3-1.
E153 End adapter FCODE,
probe/evaluation Go to “Step 1540-25” on page 2-60.
If a network adapter or I\O board is
replaced, see 3-1.
E154 Create PCI bridge node Go to “Step 1540-25” on page 2-60.
If a network adapter or I\O board is
replaced, see 3-1.
3-52
RS/6000 Enterprise Server Model H Series Installation and Service Guide