IBM H SERIES RS/6000, Инструкция по установке и обслуживанию

Страница: 131 / 424

Table 3-1 (Page 24 of 38). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
2BA00376 Service Processor reports power
supply failure 1. Replace failing power supply.
2. Replace I/O Board (See notes on 3-1.)
2BA00399 Service Processor reports Unsup-
ported value in EPOW Replace I/O Board (See notes on 3-1.)
40100005 A loss of system power detected Possible main power loss. If not, replace
power supply.
40100007 Immediate shutdown Possible main power loss. If not, replace
power supply.
40110000 Redundant power supply fail 1. Power supply.
2. I/O board (See notes on 3-1.)
3. Service Processor (Model H50 only).
40110001 Power supply fail 1. Power supply.
2. I/O board. (See notes on 3-1.)
3. Service Processor (Model H50 only).
40110002 Voltage is present, but not detected
on both processor cards For Model H50:
1. Check cable between CPU card and
PDB for proper seating.
2. Replace power supply.
3. Replace PDB.
For Model H70: Replace power supply.
40110003 Voltage is present, but not detected
on one processor card. (If the
system is running, refer to the AIX
error log to find out which processor
card is failing. If the system is not
running, refer to the service
processor error log.) For Model H50:
1. Check cable between CPU card and
PDB for proper seating.
2. Replace CPU card.
3. Replace cable between CPU card and
PDB.
4. Replace PDB.
For Model H70: Replace power supply.
40110004 For Model H50: Loss of redundant
power supply. (If the system is
running, refer to the AIX error log to
find out which processor card is
failing. If the system is not running,
refer to the service processor error
log.) For Model H70: Low voltage
detected in power supply main
enclosure. For Model H50:
1. Power supply.
2. PDB.
3. I/O board. (See notes on 3-1.)
For Model H70:
1. Check I 2 C cable to connector on I/O
Board.
2. Power supply.
Chapter 3. Error Code to FRU Index
3-25