IBM eserver xSeries 350, Руководство пользователя, Страница: 75 / 174

Chapter 5. Installing options
63
system to support SMP. See “Chapter 4. ServerGuide,” on page 23 and your
operating-system documentation for additional information.
If your server has a ServeRAID adapter installed and you have installed or removed a
hard disk drive, see the documentation that comes with your ServeRAID adapter for
information about reconfiguring your disk arrays.
Connecting external options
Before you begin:
• Review “Before you begin” on page 39.
• Read the documentation that comes with your options.
You can attach external options to the input/output (I/O) connectors on the rear of
your server. (See “Input/output ports” for more information.)
To attach an external device:
1. Turn off the server and all attached devices.
2. Follow the instructions that come with the option to prepare it for installation and
to connect it to the server.
Note: If you are attaching an external SCSI device, see “Ultra160 SCSI ports” on page
67 for information about SCSI cabling and SCSI IDs.
Input/output ports
This section provides information about the input/output (I/O) connectors on the
rear of your server. These connectors include the following:
• One parallel port
• One video port
• One keyboard port
• One auxiliary-device (pointing device) port
• Two Ultra160 SCSI ports
• Two serial ports
• Two Universal Serial Bus (USB) ports
• One Ethernet port
• Three communication ports dedicated to the Advanced System Management
processor