IBM eserver xSeries 350, Руководство пользователя

Страница: 113 / 174

Chapter 6. Solving problems
101
089 Microprocessor Failed Test setup error: Application microprocessor not
installed or BIOS setup problem 1. Verify that the
Application
microprocessor is
installed and seated
correctly.
2. Check the system
error log for related
error messages.
3. If your server does
not have the latest
level BIOS installed,
update the BIOS.
4. If the problem
persists, replace the
application
microprocessor and
run the test again.
If the problem persists,
call for service.
VRM corresponding to Microprocessor in socket
xyz is defective
(where xyz identifies the microprocessor whose
VRM is causing the error message)
Replace the VRM.
If the problem remains,
call for service.
VRM corresponding to Microprocessor in socket
id xyz is not installed
(where xyz identifies the microprocessor whose
VRM is causing the error message)
Install a VRM.
If the problem persists,
call for service.
165 Service processor Failed Advanced System Management Processor on
system board Call for service.
175 System thermal Failed Fan # n
(where n is the number of the failing fan)
Note:
The fan LED on the diagnostic LED
panel will be lit.
Replace the indicated fan.
Temperature sensed on system board is out of
range If one of the fan LEDs on
the diagnostic LED panel
is on, replace the
indicated fan. If the
problem persists, call for
service.
180 Status display Failed Diagnostic LED panel Call for service.
Operator information panel
LED on hot-swap SCSI backplane
LED on processor board
LED on system board
Code Function Result Text message Action