IBM eserver xSeries 350, Руководство пользователя

Страница: 151 / 174

Chapter 7. Rack installation instructions
139
4 3
A
Use the tab on the rear of the slide rail to
align the slide rail to the rack. If it is necessary
to adjust the slide rail, loosen the screws on
the rear of the rail.
A
B
B
Use the M6 screws to bolt the slide rail to the
front of the rack (left front of rack
olt the slide rail
and the hinge bracket on the right rear of the
rack. Keep the hinge bracket as vertical as
possible to prevent the cable management
arm from sagging. If you loosened the screws
at the rear of the slide rail, tighten them now.
Repeat the slide-rail-installation instructions
for the other slide rail.
shown here).
Then, use the M6 screws to b
B
5
B
A
A
Use the hinge pin to attach the cable-
management arm to the hinge bracket.
6
A
A
Fully extend the slide rails out of the rack.
Lift the server above the rails; then, rest
rack-support wheels on the slide rails.
Caution: To avoid injury, do not place your
fingers around the rack-support wheels
when lowering the server onto the rails.
A
A